Water glass sand casting_A professional concave、mantle liners、Jaw Plate、hammers、Blow bar、Mill Liners high manganese steel castings manufacturers-Hubei JYS advanced wear resistant material technology Co. Ltd

PRODUCT DESCRIPTION

Foundry casting crusher wear parts in the country is still very popular, like the jaw, high chromium plate hammer, broken wall, rolling acetabular wall and so on, because the crusher equipment, as a relatively large wear-resistant castings, relatively speaking, the accuracy is not very high, especially as the jaw, the finished product almost no lathe polished, broken wall, rolling acetabular wall, roll paper and the like is only part of the needs of local casting lathe polished, it is particularly suitable for sand casting because jaw sand casting, high chrome hammer, broken wall, rolling acetabular wall, broken roll skin, etc.
Sand casting Blow Bars
Sand composite casting process to produce high-chrome cast iron, can improve the casting surface and internal quality is to improve the abrasion resistance plate hammer, effective measures to prolong its life
Sand casting Concave& mantle
Hubei JYS foundry sand to ensure all aspects of technology, materials and other rolling acetabular wall abrasion resistance, improved rolling acetabular wall, broken wall hardness, wear resistance, significantly extend its service life, and large margin improved rolling acetabular wall, broken wall hardness and wear resistance under the premise of minimizing rolling acetabular wall, broken wall of the manufacturing cost, profit to customers, to achieve a low-cost high-quality combined
Sand casting jaws plate
Alloy steel, carbon steel double liner with cast metal casting jaw, using a special gating system and the casting process, to ensure a uniform and complete composite interface, and it has good microstructure and mechanical properties in different grinding material exhibits both high wear resistance.
Sand casting hammer
Sand casting cast-steel / high chromium cast iron and high manganese steel / low alloy steel composite hammer, and achieved good results in actual production, increased by 1-2 times higher than a single high-manganese steel and low alloy hammer hammer , effective way to improve the life of hammer crusher is the use of dual-metal composite casting technology.
Hubei JYS is a specialized foundry casting factory, the main Concave, mantle, jaw, hammer, hammer, linings and other wear-resistant castings, sand casting are produced at our own foundries and manufacturing facilities. As a result, we have complete control over quality at every step of the process, from the selection of raw materials right on through to final production.
Please contact us with you requirement or if you do not see the part you need listed above. vip@jinyangshi.com, +86-0717-3286139 .

PERFORMANCE CHARACTERISTICS

COMPETITIVE PRICES
The company has a captive power plant and foundry sand, low production costs, factory outlets, a strong price advantage
BETTER QUALITY
Crusher wear parts are produced at our own foundries and manufacturing facilities. As a result, we have complete control over quality at every step of the process, from the selection of raw materials right on through to final production.
HIGH EFFICIENCY
99% qualified rate of spare parts, 97% qualified rate of finished products, 99% qualified rate of finished products left fty,Processing rate of customer feedback is up to 100%
CUSTOM CASTING
Supplying Custom Wear Parts for Mining Machinery, Mixing Plant and Construction Equipment

TECHNICAL PARAMETER

Casting Process Features	Process Features
Sand casting	Sand casting is a traditional mold casting process by sand as the main material. Sand generally use gravity casting may also have low pressure casting centrifugal casting process when there are special requirements. Sand casting wide adaptability smallparts large parts simple parts complex parts a single parts large quantities can be employed
V method casting	The products of V method casting has less porosity high dense smooth surfaceclear outline size accurate.The mold and sand box have a long service time high utilization rate of the metal. The process shrinkage is approx. 0.2% lower than sand casting.
Lost foam casting	Lost foaming casting is particularly suitable for complex geometry mold such as box-type bobbin type which is difficult for the traditional casting.

Here is only some type for sand casting. As the improvement of product, the specifications are changed. If you need the further information, please contact our sales or Email us.

ENTERPRISE STRENGTH

The company has two sand production line, a V-method casting production lines, an EPC production line, a machine shop; 2 5T electric furnace, two 3T intermediate frequency electric furnace, 2 1T intermediate frequency electric furnace, the largest can do 12 tons of castings, annual production capacity of 15,000 tons or more, to create South Africa's largest wear-resistant materials production base.

sand production line
V-method casting production lines

GLOBAL COOPERATION

Dialogue with international, multinational construction group, the company has an independent import and export business qualification, and long-term exchanges and cooperation overseas countries, not only the company's products to maintain a high level, and won wide international market, the products are exported to Russia, Kazakhstan Stan, Turkey, Saudi Arabia, South Africa, Vietnam, India, the United States, Australia and other 30 countries and regions.

United States
Canada

SPECIAL REMINDER

Hubei JYS new wear-resistant materials Co., Ltd. is a specialized manufacturer of wear-resistant castings, mainly engaged in high manganese steel, high chrome, wear-resistant alloy steel castings, the annual provision of other manufacturers of spare parts processing business, no matter what the manufacturers what models wear castings, as long as you can provide drawings, samples or molds, we can produce!
Tel: +86 0717-3286139 E-mail: vip@jinyangshi.com

Casting Technology