Lost foam casting_A professional concave、mantle liners、Jaw Plate、hammers、Blow bar、Mill Liners high manganese steel castings manufacturers-Hubei JYS advanced wear resistant material technology Co. Ltd

PRODUCT DESCRIPTION

Lost Foam Casting (also named solid casting) is a new casting method which combined casting wax model and foam that has similar size and shape to bonded into the cluster model, brushing fire-resistant paint and after drying, it will be buried into the dry sand quartz vibration modeling, negative pressure under pouring, so that the model gasification, liquid metal to occupy the position of the model, the casting formed after solidification cooling. It is suitable for various grades of steel, iron, aluminum, copper, etc., large variety of materials with different structures, medium and small all kinds of casting, complex structure casting will be better.
Lost Foam Casting jaw plate
Using EPC method to product the high manganese steel jaw plate, when we change the original material ZGMn13 to ZGMn13-4, the high-manganese steel jaws plate life expectancy will substantial increased.
Lost Foam Casting hammer
Hammerhead is the key parts of building materials, mining, chemical and other industries area which in hammer crusher, and it is also the wearing parts, with the lost foam casting process to produce a bimetal hammer compared with high manganese steel, the hammer get a significantly improvement in wear resistance.
Lost Foam Castingbar hammer
Hammer as mining consumables which in commonly used industry equipment, you need to have a good life in order to reduce production costs and increase economic efficiency, 1315 board hammer has simple structure, and it is the bulky, thick and large part, with lost foam casting, it can simplify casting process, many piece can be filled in one box, it can improve production efficiency greatly.
Lost Foam CastingLiner
The service conditions are very bad in mine and wet ball mill lined plate, the traditional high manganese steel and alloy steel liner’s life is generally not high. We have successfully develope a new type of micro-alloy liner wear basing on LFC new micro alloy composite casting technology, and the wear resistance coefficient is relatively better than common alloy steel liner.
We are a professional manufacturer of Lost Foam Casting process, our production are the ring roller mill, jaw plate, plate hammer, hammer, linings and other wear-resistant castings parts, The wear-resistant products with lost foam casting process, the size is precise, and appearance is smoothly, it has good quality and high efficiency!
Please contact us with you requirement or if you do not see the part you need listed above. vip@jinyangshi.com, +86-0717-3286139 .

PERFORMANCE CHARACTERISTICS

COMPETITIVE PRICES
The company has a captive power plant and foundry sand, low production costs, factory outlets, a strong price advantage
BETTER QUALITY
Crusher wear parts are produced at our own foundries and manufacturing facilities. As a result, we have complete control over quality at every step of the process, from the selection of raw materials right on through to final production.
HIGH EFFICIENCY
99% qualified rate of spare parts, 97% qualified rate of finished products, 99% qualified rate of finished products left fty,Processing rate of customer feedback is up to 100%
CUSTOM CASTING
Supplying Custom Wear Parts for Mining Machinery, Mixing Plant and Construction Equipment

TECHNICAL PARAMETER

Casting Process Features	Process Features
Sand casting	Sand casting is a traditional mold casting process by sand as the main material. Sand generally use gravity casting may also have low pressure casting centrifugal casting process when there are special requirements. Sand casting wide adaptability smallparts large parts simple parts complex parts a single parts large quantities can be used
V method casting	The products of V method casting has less porosity high dense smooth surfaceclear outline size accurate.The mold and sand box have a long service time high utilization rate of the metal. The process shrinkage is approx. 0.2% lower than sand casting.
Lost foam casting	Lost foaming casting is particularly suitable for complex geometry mold such as box-type bobbin type which is difficult for the traditional casting.

Here is only some type for Lost foam casting. As the improvement of product, the specifications are changed. If you need the further information, please contact our sales or Email us.

ENTERPRISE STRENGTH

The company has two sand production line, a V-method casting production lines, an EPC production line, a machine shop; 2 5T electric furnace, two 3T intermediate frequency electric furnace, 2 1T intermediate frequency electric furnace, the largest can do 12 tons of castings, annual production capacity of 15,000 tons or more, to create South Africa's largest wear-resistant materials production base.

sand production line
V-method casting production lines

GLOBAL COOPERATION

Dialogue with international, multinational construction group, the company has an independent import and export business qualification, and long-term exchanges and cooperation overseas countries, not only the company's products to maintain a high level, and won wide international market, the products are exported to Russia, Kazakhstan Stan, Turkey, Saudi Arabia, South Africa, Vietnam, India, the United States, Australia and other 30 countries and regions.

United States
Canada

SPECIAL REMINDER

Hubei JYS new wear-resistant materials Co., Ltd. is a specialized manufacturer of wear-resistant castings, mainly engaged in high manganese steel, high chrome, wear-resistant alloy steel castings, the annual provision of other manufacturers of spare parts processing business, no matter what the manufacturers what models wear castings, as long as you can provide drawings, samples or molds, we can produce!
Tel: +86 0717-3286139 E-mail: vip@jinyangshi.com

Casting Technology