Power plant Wear resistant parts_A professional concave、mantle liners、Jaw Plate、hammers、Blow bar、Mill Liners high manganese steel castings manufacturers-Hubei JYS advanced wear resistant material technology Co. Ltd

PRODUCT DESCRIPTION

Except coal, wear-resistant parts and consumable items are large thermal power plants directly affects the cost of power generation, power plants wear parts have ball mill, mill liner, pulverizers grinding roller sleeve , disc liner, grinding ring, fan mill impact plate, armor and so on.
Mill liner
To the liner, the wear resistance is better than the addition to the requirements, which also requires better toughness can not be broken, now widely promote the use of high-manganese steel as a wear resistant material. This material after quenching with high strength and toughness, and good wear resistance and non-magnetic. M13 steel mill used in power plants, coal crusher, and belong to such products; JYS on the basis of the development of new micro-alloy liner wear, higher abrasion resistance!
Ring hammer coal crusher hammer tooth
In order to obtain a higher hardness JYS now using alloying elements to replace part of the carbon steel as a strengthening element, made of rare earth wear-resistant steel. This steel and general steel its hardness close, but its higher hardness after quenching air cooling, using this material ball mill liner and ring hammer crusher hammer, the power plants have achieved good results.
Medium speed mill grinding roller grinding ring
In the milling machine parts, the most important consumable product is grinding roller and grinding ring, the ring of the roller mill and requested its good wear resistance, but also has a certain toughness, so the material requirements are relatively high, generally both alloy and high manganese steel.
Hubei JYS is a professional casting plant wear parts manufacturers, Power plant Wear resistant parts are produced at our own foundries and manufacturing facilities. As a result, we have complete control over quality at every step of the process, from the selection of raw materials right on through to final production.
Please contact us with you requirement or if you do not see the part you need listed above. vip@jinyangshi.com, +86-0717-3286139 .

PERFORMANCE CHARACTERISTICS

COMPETITIVE PRICES
The company has a captive power plant and foundry sand, low production costs, factory outlets, a strong price advantage
BETTER QUALITY
Crusher wear parts are produced at our own foundries and manufacturing facilities. As a result, we have complete control over quality at every step of the process, from the selection of raw materials right on through to final production.
HIGH EFFICIENCY
99% qualified rate of spare parts, 97% qualified rate of finished products, 99% qualified rate of finished products left fty,Processing rate of customer feedback is up to 100%
CUSTOM CASTING
Supplying Custom Wear Parts for Mining Machinery, Mixing Plant and Construction Equipment

TECHNICAL PARAMETER

model	（r/min）	(t)	product size (mm)	hourly capacity (t/h)	power (kw)	weight (t)
model	（r/min）	(t)	product size (mm)	hourly capacity (t/h)	power (kw)	weight (t)
Ф900×1800	36-38	1.5	0.075-0.89	0.65-2	18.5	5.5
Ф900×3000	36	2.7	0.075-0.89	1.1-3.5	22	6.7
Ф1200×2400	36	3	0.075-0.6	1.5-4.8	30	12
Ф1200×3000	36	3.5	0.074-0.4	1.6-5	37	12.8
Ф1200×4500	32.4	5	0.074-0.4	1.6-5.8	55	13.8
Ф1500×3000	29.7	7.5	0.074-0.4	2-5	75	16.8
Ф1500×4500	27	11	0.074-0.4	3-6	110	21
Ф1500×5700	28	12	0.074-0.4	3.5-6	130	25.8
Ф1830×3000	25.4	11	0.074-0.4	4-10	130	29
Ф1830×4500	25.4	15	0.074-0.4	4.5-12	155	35.5
Ф1830×6400	24.1	21	0.074-0.4	6.5-15	210	43
Ф1830×7000	24.1	23	0.074-0.4	7.5-17	245	43.8
Ф2100×3000	23.7	15	0.074-0.4	6.5-36	155	34.8
Ф2100×4500	23.7	24	0.074-0.4	8-43	245	38
Ф2100×7000	23.7	26	0.074-0.4	8-48	280	56.6
Ф2200×4500	21.5	27	0.074-0.4	9-45	280	51.8
Ф2200×6500	21.7	35	0.074-0.4	14-26	380	60
Ф2200×7000	21.7	35	0.074-0.4	15-28	380	62
Ф2200×7500	21.7	35	0.074-0.4	15-30	380	64.8
Ф2400×3000	21	23	0.074-0.4	7-50	245	54
Ф2400×4500	21	30	0.074-0.4	8.5-60	320	65
Ф2700×4000	20.7	40	0.074-0.4	12-80	380	94
Ф2700×4500	20.7	48	0.074-0.4	12-90	480	102
Ф3200×4500	18	65	0.074-0.4		800	137
Ф3600×4500	17	90	0.074-0.4		850	158
Ф3600×6000	17	110	0.074-0.4		1250	175
Ф3600×8500	18	131	0.074-0.4	45.8-256	1800	252
Ф4000×5000	16.9	121	0.074-0.4	45-208	1500	203
Ф4000×6000	16.9	146	0.074-0.4	65-248	1600	218
Ф4000×6700	16.9	149	0.074-0.4	45-252	1800	238
Ф4500×6400	15.6	172	0.074-0.4	54-306	2000	280
Ф5030×6400	14.4	216	0.074-0.4	68-386	2500	320
Ф5030×8300	14.4	266	0.074-0.4	88-500	3300	403
Ф5500×8500	13.8	338	0.074-0.4	108-615	4500	525

Here is only some type for Power plant Wear-resistant parts. As the improvement of product, the specifications are changed. If you need the further information, please contact our sales or Email us.

ENTERPRISE STRENGTH

The company has two sand production line, a V-method casting production lines, an EPC production line, a machine shop; 2 5T electric furnace, two 3T intermediate frequency electric furnace, 2 1T intermediate frequency electric furnace, the largest can do 12 tons of castings, annual production capacity of 15,000 tons or more, to create South Africa's largest wear-resistant materials production base.

sand production line
V-method casting production lines

GLOBAL COOPERATION

Dialogue with international, multinational construction group, the company has an independent import and export business qualification, and long-term exchanges and cooperation overseas countries, not only the company's products to maintain a high level, and won wide international market, the products are exported to Russia, Kazakhstan Stan, Turkey, Saudi Arabia, South Africa, Vietnam, India, the United States, Australia and other 30 countries and regions.

United States
Canada

SPECIAL REMINDER

Hubei JYS new wear-resistant materials Co., Ltd. is a specialized manufacturer of wear-resistant castings, mainly engaged in high manganese steel, high chrome, wear-resistant alloy steel castings, the annual provision of other manufacturers of spare parts processing business, no matter what the manufacturers what models wear castings, as long as you can provide drawings, samples or molds, we can produce!
Tel: +86 0717-3286139 E-mail: vip@jinyangshi.com

Solutions