GET LATEST PRICE
vip@jinyangshi.comGET LATEST PRICE
vip@jinyangshi.comThe crushing of the cone crusher is basically the same as that of the rotary crusher. But also with the movable cone and fixed cone between the working surface to the mine. The movable cone is supported on the spherical bearing and is fixed on a suspe...
The overall performance of the jaw crusher is closely related to the size of the machining of each part. In the machining process of the crusher, it is required to ensure that the tolerances of the drawings are guaranteed as much as possible so as to redu...
Jaw crusher is one of the most commonly used crushing equipment in industrial and mining production. In the production operation, it is often encountered some problems. Now the jaw crusher common troubleshooting methods are as follows: 1. The brackets are...
Jaw crusher in the long-term use will have some different degrees of problems, unreasonable use will cause unnecessary losses. In order to ensure the normal use of the subsequent failure of the machine, it is necessary to understand about the jaw crusher ...
With the national large-scale infrastructure construction, construction waste increasing, seriously affected peoples daily life, hinder the improvement of quality of life. As we all know, the traditional burial and incineration is not the best solution. T...
There are many factors that affect the working of the jaw crusher, but the impact of the overload problem is the most common and the deepest. When the strength of the material to be broken more than 300MPa, if there is no safe and reliable overload pr...
High manganese steel castings (high manganese steel) refers to the amount of manganese alloy steel castings in more than 10%. Used to produce excavator shovel teeth, cone crusher broken wall and rolling wall, jaw crusher fork plate, ball mill liners, rail...
Hammer is an important component of the crusher, it is also the broken parts subject to wear. Depending on factors, the board hammer more or less subject to wear. The EV kit life hammer, hammer plate in addition to the material, we must also consider othe...
The silicon composition in Limestone chemical can impact the life of the hammer directly, the higher silicon content, the shorter the life of the hammer, the best situation is limestone silicon content of less than 2%. On the other hand the level of compr...
Casting V production of wear-resistant castings has six advantages, these advantages are as follows:...
Compared with the traditional casting process, EPC technology has unparalleled advantage, less investment, quick effects, it sets up a fresh wave in the foundry industry, many foundries have tried to use EPC technology to produce products in recent years,...
Tel：+86 0717-3286139
Phone：+8618872506886
Fax：+86 0717-3286139
Mail：vip@jinyangshi.com
Website：http://www.jinyangshi.net
Address：East 15 Jinping Avenue,Dangyang,Hubei Province,China
Cone Crusher Parts Jaw crusher parts Hammer crusher parts HSI Impact Crusher parts More
High manganese steel casting High chromium casting Alloy steel castings More
Water glass sand casting V method of casting Lost foam casting More
Mining wear resistant parts Cement wear resistant parts Power plant Wear resistant part More
Copyright：HUBEI JYS ADVANCED WEAR RESISTANT MATERIAL TECHNOLOGY CO.,LTD.
Mailto:vip@jinyangshi.com
Hotline:+86 0717-3286139 
