Wear parts

Location : Home > PRODUCTS > Wear parts >

Jaw crusher parts

  • Common Aliases：Jaw Liners, jaw dies, fixed jaw plate, stationary jaw plate, Movable Jaw Plates
  • Main Material：high manganese steel (Mn13, Mn13Cr2, Mn18, Mn18Cr2)
  • Casting Technology：sand casting, lost foam foundry, v-process foundry
  • Applicable Materials： river gravel, granite, basalt, iron ore, limestone, quartz, diabase
  • Applications：gravel quarry, mining, coal mining, concrete mixing plants, dry mortar

PRODUCT DESCRIPTION

   Jaw crusher comes with extensive applications. Due to the differences in crusher size, feeding particle size and material hardness, the compaction and impact forces on the jaw plates are different. Hubei JYS  can provide wearing parts for various models jaw crushers, such as stationary jaw plate, movable jaw plates, guard plate etc. And we can also manufacture products with different materials according to the drawings supplied by our customers.
        High manganese steel jaw plate
        High manganese steel is the traditional material jaw crusher jaw, which has good toughness, also has good deformation hardening. Material uses: Mn13, Mn13Cr2, Mn18, Mn18Cr2 ( ultra-high manganese) or special ingredients according to working conditions, Hubei JYS production of new micro-alloy high manganese steel jaw crusher jaw, delicate, precise ingredients, heat treatment place, the jaw plate wear life than similar products in more than 20%.
        Inlaid carbide jaws plate
        High manganese steel is used as the base material of the jaw plate, at their work site complex mosaic carbide, the wear surface of the double-metal composite wear-resistant member having excellent wear resistance, non-abrasive surface has excellent plastic and impact toughness. Installed by the user to use, reflecting the same good results.
        Low-alloy steel jaws plate
        Carbon low-alloy steel is more extensive application of a wear-resistant material, mainly because of its high hardness and toughness appropriate fit, the material can resist cutting action and material fatigue caused by repeated pressing of peeling, thus It exhibits good wear resistance. Meanwhile Medium Carbon Low Alloy Steel can also adjust the composition and heat treatment process, the hardness and toughness over a wide range of changes to adapt to different working conditions requirements.
        Jaw crusher side guards
        Jaw crusher side guards, also called fork called baffle plate located between the teeth and fixed teeth plate activity, the quality of high manganese steel castings, generally each machine 2, there are four; it is a product types of high strength wear-resistant steel, can effectively protect the body, to extend the life of the rack.
        Hubei JYS produces manganese wear liners and accessories for most crushing brands .
        Above all, we also have the expertise to modify Jaw or Cone liner profiles by studying existing wear pattern of your liners and redesigning them in order to enhance wear life improve performance thus giving more value for your money.
        Please contact us with you requirement or if you do not see the part you need listed above.  vip@jinyangshi.com, +86-0717-3286139 .

PERFORMANCE CHARACTERISTICS

  • COMPETITIVE PRICES

    The company has a captive power plant and foundry sand, low production costs, factory outlets, a strong price advantage

  • BETTER QUALITY

    Crusher wear parts are produced at our own foundries and manufacturing facilities. As a result, we have complete control over quality at every step of the process, from the selection of raw materials right on through to final production.

  • HIGH EFFICIENCY

    99% qualified rate of spare parts, 97% qualified rate of finished products, 99% qualified rate of finished products left fty,Processing rate of customer feedback is up to 100%

  • CUSTOM CASTING

    Supplying Custom Wear Parts for Mining Machinery, Mixing Plant and Construction Equipment

TECHNICAL PARAMETER

model feed opening
(mm）		 (mm) max feed size (mm)Adjustment range of discharge opening capacity
(t/h)		 (r/min)Eccentric shaft speed power
(kw)		 (mm)Size (L*W*H)
PE-150×250 150×250 125 10-40 1-3 250 5.5 720×660×850
PE-200×300 200×300 180 15-50 2-6 260 7.5 910×750×990
PE-200×350 200×350 180 18-70 3-10 260 11 1000×870×990
PE-250×400 250×400 210 20-60 5-20 300 15 1300×1090×1270
PE-400×600 400×600 340 40-100 16-60 275 30 1730×1730×1630
PE-500×750 500×750 425 50-100 40-110 275 55 1980×2080×1870
PE-600×750 600×750 500 150-200 80-240 275 55 2070×2000×1920
PE-600×900 600×900 500 65-160 50-180 250 55 2190×2206×2300
PE-750×1060 750×1060 630 80-140 110-320 250 110 2660×2430×2800
PE-800×1060 800×1060 640 130-190 130-330 250 110 2710×2430×2800
PE-830×1060 830×1060 650 160-220 150-336 250 110 2740×2430×2800
PE-870×1060 870×1060 660 200-260 190-336 250 110 2810×2430×2800
PE-900×1060 900×1060 685 230-290 230-390 250 110 2870×2420×2940
PE-900×1200 900×1200 750 95-165 220-450 200 110 3380×2870×3330
PE-1000×1200 1000×1200 850 195-265 315-500 200 110 3480×2876×3330
PE-1200×1500 1200×1500 1020 150-350 400-800 180 160-220 4200×3300×3500
PE-1500×1800 1500×1800 1200 220-350 500-1000 180 280-355 5160×3660×4248
PE-1600×2100 1600×2100 1500 300-400 1300-2200 160 350-380 6210×4013×4716
PEX-150×750 150×750 120 18-48 8-25 320 15 1200×1530×1060
PEX-250×750 250×750 210 25-60 13-35 330 30 1380×1750×1540
PEX-250×1000 250×1000 210 25-60 16-52 330 30 1560×1950×1390
PEX-250×1200 250×1200 210 25-60 20-61 330 37 2140×1660×1500
PEX-300×1300 300×1300 250 20-90 16-105 300 55 2720×1950×1600
       
      Here is only some type for jaw crusher parts. As the improvement of product, the specifications are changed. If you need the further information, please contact our sales or Email us.
      All brand names, model names or marks are owned by their respective manufacturers. Hubei JYS Foundry has no affiliation with the original equipment manufacturer. These terms are used for identification purposes only and are not intended to indicate affiliation with or approval by the OEM. All parts are manufactured by, for and warranted by  Hubei JYS Foundry Foundry and are not manufactured by, purchased from or warranted by the original equipment manufacturer.

ENTERPRISE STRENGTH

The company has two sand production line, a V-method casting production lines, an EPC production line, a machine shop; 2 5T electric furnace, two 3T intermediate frequency electric furnace, 2 1T intermediate frequency electric furnace, the largest can do 12 tons of castings, annual production capacity of 15,000 tons or more, to create South Africa's largest wear-resistant materials production base.

GLOBAL COOPERATION

Dialogue with international, multinational construction group, the company has an independent import and export business qualification, and long-term exchanges and cooperation overseas countries, not only the company's products to maintain a high level, and won wide international market, the products are exported to Russia, Kazakhstan Stan, Turkey, Saudi Arabia, South Africa, Vietnam, India, the United States, Australia and other 30 countries and regions.

SPECIAL REMINDER

Hubei JYS new wear-resistant materials Co., Ltd. is a specialized manufacturer of wear-resistant castings, mainly engaged in high manganese steel, high chrome, wear-resistant alloy steel castings, the annual provision of other manufacturers of spare parts processing business, no matter what the manufacturers what models wear castings, as long as you can provide drawings, samples or molds, we can produce!
Tel: +86 0717-3286139 E-mail: vip@jinyangshi.com

RELATED PRODUCTS

LASTEST NEWS