NEWS

Your Current Location：Home > NEWS > Industry News >

High Manganese Cone Crusher Mantle And Concave

VIEWS: times Release Date：2016-12-26

Introduction： Hubei JYS is a professional high manganese cone crusher mantle and concave factory,if you do not see the part you need listed above. vip@jinyangshi.com, +86-0717-3286139 .

Hubei JYS is a professional high manganese steel castings factory, in order to improve the performance of high manganese steel were many alloying, micro alloying, research and other aspects of the treatment of carbon manganese content adjustment and precipitation hardening, and widely used in the production practice, and praised by customers!

M13 mantle & concave

Mn13 has a high tensile strength, ductility and toughness as well as non-magnetic, even if the parts too thin, it is able to withstand greater impact loads without rupture, it can be used to cast a variety of impact-resistant wear parts.

Mn13Cr2 mantle & concave

Mn13Cr2 when reduce the traditional high manganese steel C, and Mn, adding Cr element, which can make up for the shortcomings of traditional high manganese steel toughness defect, effectively extending the service life of wear-resistant parts.

Mn18 mantle & concave

Wear resistant manganese steel casting is the oldest and most widely used. Especially the standard of Mn18 high manganese steel concave with manganese and high carbon content; cast microstructure is austenitic steel and carbide, after 1050 ℃ water toughening treatment, the vast majority of carbide solid solution in Austria’s body.

Mn18Cr2 mantle & concave

Using the material Mn18Cr2, the complex modification, grain refinement, grain boundary purification; Casting solidification control mode, optimization of heat treatment process, casting becomes to high hardness and good toughness, impact resistant, it is suitable for medium-sized cone crusher jobs.

Please contact us with you requirement or if you do not see the part you need listed above. vip@jinyangshi.com, +86-0717-3286139 .

Previous：China Cone Crusher Manganese Wear Parts Next：crusher replacement parts manufacturers

OTHERS FOLLOW

crusher replacement parts manufacturers...2018-07-25
1214,1315 counterattack broken boards hammer models...2016-08-23
Universal jaw crusher parts...2017-04-20
Gyratory Crusher Mantles Suppliers...2018-07-25
China Mining Crusher Wear Parts Manufacturer...2016-12-30
High Manganese Steel Wear Parts Manufacturers...2017-01-04

Hot Products

News

Contact Us

Tel：+86 0717-3286139
Phone：+8618872506886
Fax：+86 0717-3286139
Mail：vip@jinyangshi.com
Website：http://www.jinyangshi.net
Address：East 15 Jinping Avenue,Dangyang,Hubei Province,China

NEWS

High Manganese Cone Crusher Mantle And Concave

OTHERS FOLLOW

RELATED READING

MESSAGE

Hot Products

News

Contact Us

Wear parts

Casting Material

Casting Technology

Solutions

About JYS

MESSAGE